About Project

Ministries District waterproofing covers landscape, planter and water-feature work in Egypt’s New Administrative Capital. Official records put the treated area at about 20,000 m², applied by ETS in 2020–2021.

Contractor ETS
Completed 2020–2021
Website Krypton Chemical Solutions — Ministries District

Project overview

The Ministries District sits at the heart of Egypt’s New Administrative Capital, east of Cairo: government buildings arranged around public squares, gardens and water features. That landscape is not decoration. A planter that leaks soaks the slab below; a basin that loses water wastes a scarce resource in a desert city.

Krypton Chemical’s official project records describe this as long-life waterproofing for planted areas and water features that stay wet, not a roof that dries between storms. The Cairo waterproofing contractor ETS carried out the application.

Scope of waterproofing works

  • Location: Ministries District, New Administrative Capital, Egypt.
  • Years: 2020–2021.
  • Area: about 20,000 m².
  • Scope: planters, landscape areas and water features.
  • Applicator: ETS.

Krypton systems for this type of work

Both official Krypton Chemical project pages cover the same place, area, years, applicator and scope. They do not describe the system in identical words, and this page does not force them into one product list.

The later project record names the membrane as Impermax Polyurea H, Krypton’s hot-spray pure polyurea: a two-component resin, free of solvents and mineral fillers, applied with a heated spray machine to form a continuous elastomeric film with no joints or overlaps. Impermax Polyurea H TDS: gel time of a 20 g A+B mix is 8–9 s at 25°C; spray 2 kg/m² as a rule; elongation at break 400%; tensile strength 15 MPa; hardness 90A/40D (ISO 868); static crack bridging class A5 at −10°C (EN 1062-7); rain resistance after 15 minutes and light pedestrian traffic in 1 hour at 25°C / 50% RH; ETA 11/062, including root-penetration resistance to EN 13948. Those figures are product data, not measurements taken on this site.

The earlier official record describes the same works as Krypton pure spray polyurea together with an Impermax liquid polyurethane membrane, and discusses Polyurea Rayston in the product notes. Polyurea Rayston TDS: gel time 4 s at 25°C, typical film 1.5–2 mm from 1.5–2.0 kg/m², elongation 324%, tensile strength 16.2 MPa (EN ISO 527-1/3). Impermax TDS: maximum elongation 450–600%, tensile strength 2.5–4.3 MPa; two coats of about 1 kg/m² each, preferably in different colours; about 90% of final properties in 3 days under usual conditions; light walking usually in 1 or 2 days; final hardness in 10 or 15 days, and the TDS prefers to wait that time before contact with water.

What both records agree on is a liquid-applied, continuous lining that can turn up walls, around pipes and across basin floors as one skin — the detail a planter and a water feature need.

Surface preparation decides the result

The official records and the datasheets agree on the discipline of the support: the concrete is prepared mechanically until it is sound and open-pored, cracks are repaired first, and dust is removed. For Polyurea Rayston the TDS requires a pull-off of at least 1.4 N/mm² and moisture below 4%. For Impermax Polyurea H the TDS states a minimum pull-off of 1.5 N/mm². Those are product conditions, not test results published for this site.

Related official project record

Contractor: ETS. Completed: 2020–2021. To discuss a similar project, contact Krypton Egypt.

Official project record: Ministries District landscape waterproofing on kryptonchemicalsolutions.com.

No comment

Leave a Reply

Your email address will not be published. Required fields are marked *