About Project
Berenice Airport roof waterproofing was completed in 2020 at Berenice International Airport on Egypt’s Red Sea coast using hot-spray pure polyurea. Core, of Hassan Allam Sons, carried the contract.
Contractor Core, Hassan Allam Sons
Completed 2020
Website Krypton Chemical Solutions — Berenice Airport
Project overview
Berenice International Airport serves Egypt’s southern Red Sea coast. In 2020, its roofs were waterproofed with Polyurea Rayston, applied across the roof fields and details.
Scope of waterproofing works
- Project: Berenice International Airport.
- Place: Red Sea coast, Egypt.
- Year: 2020.
- Scope: roofs.
- Contractor: Core, Hassan Allam Sons.
- System: hot-spray pure polyurea.
Krypton systems for this type of work
The official project record names the membrane as Polyurea Rayston, Krypton’s hot-spray pure polyurea. Its technical data sheet lists a 4 s gel time at 25°C, typical film thickness of 1.5–2 mm, elongation of 324%, and tensile strength of 16.2 MPa (EN ISO 527-1/3). The resin is aromatic, so sunlight can shift its colour while mechanical strength remains. Some records mention an aliphatic topcoat such as Colodur or Impertrans as a way to hold appearance. The official record does not confirm a topcoat on this job.
The technical data sheet also reports a 4 s gel time for a 20 g A+B mix at 25°C and 3 s at 60°C; tack-free time of 30 s at 70°C; and typical consumption of 1.5–2.0 kg/m² for a 1.5–2 mm film. It lists maximum elongation of 324%, tensile strength of 16.2 MPa, tear strength of 69 N/mm, and hardness of 87A/35D. Other reported values include liquid water permeability of 0.002 kg/m²·h0.5, watertightness at 5 bar / 50 m water column, crack-bridging classes A5 and B4.2, impact strength of 24.5 N·m, and adhesion to epoxy-primed concrete of 4.0 MPa. These are product data, not site-test results.
Surface preparation decides the result
The Polyurea Rayston data sheet calls for mechanical preparation and crack repair before application. It specifies a pull-off strength of at least 1.4 N/mm², concrete moisture below 4%, and a support temperature of 10–40°C. These are product conditions, not published site-test results for this job.
Contractor: Core, Hassan Allam Sons. Completed: 2020. To discuss a similar project, contact Krypton Egypt.
Official project record: Berenice Airport roof waterproofing on kryptonchemicalsolutions.com.
Project gallery



No comment