Damietta Power Station roof waterproofing
Damietta Power Station roof waterproofing used hot-spray polyurea in 2021. Pure Contracting applied the work.
Contractor Pure Contracting
Completed 2021
Website Krypton Chemical Solutions — Damietta Power Station
Project overview
The official record states that roofs at Damietta Power Station were waterproofed with hot-spray polyurea in 2021 by Pure Contracting. A power-station roof is a working cover over equipment that cannot stop for a long recoating window.
Scope of waterproofing works
- Place: Damietta Power Station.
- Year: 2021.
- Scope: roofs.
- System: hot-spray pure polyurea.
- Applicator: Pure Contracting.
Krypton systems for this type of work
The official project record names Polyurea Rayston, Krypton’s hot-spray pure polyurea. Its TDS reports 4 s gel time at 25°C, a typical 1.5–2 mm film from 1.5–2.0 kg/m², 324% elongation and tensile strength 16.2 MPa. The resin is aromatic, so sunlight may shift colour while mechanical strength remains. A topcoat is not confirmed on this job unless named by the source.
Surface preparation decides the result
The TDS calls for mechanical preparation and crack repair first, substrate pull-off at least 1.4 N/mm², moisture below 4% and support temperature 10–40°C. These are datasheet conditions, not published site-test results for this project.
Contractor: Pure Contracting. Completed: 2021. To discuss a similar project, contact Krypton Egypt.
Official project record: Damietta Power Station roof waterproofing on kryptonchemicalsolutions.com.
Project gallery

Explore more Krypton Egypt projects.


No comment