Arkan Plaza fountain waterproofing
Arkan Plaza fountain waterproofing lined the basins beside Aeon Towers in Sheikh Zayed with hot-spray pure polyurea. The official record gives no year or applicator. This is separate from the Aeon Towers project page.
Place Arkan Plaza, Sheikh Zayed, Giza, Egypt
Scope Fountain basins
System Polyurea Rayston with a turquoise visible finish
Website Krypton Chemical Solutions — Arkan Plaza
Project overview
Arkan Plaza sits in Sheikh Zayed, west of Cairo. Aeon Towers rise above its gardens, where the fountains sit over rooms and parking. The basins remain full under strong sun.
The source describes a grey polyurea membrane first. A turquoise finish covers the basin surface seen after filling. Polyurea provides the waterproofing; the coloured coat is a visible finish. The source does not name that finish product.
Scope of waterproofing works
- Project: Arkan Plaza fountains.
- Place: Sheikh Zayed, Giza, Egypt.
- Adjacent buildings: Aeon Towers.
- Scope: fountain basins.
- System: hot-spray pure polyurea, Polyurea Rayston.
Krypton systems for this type of work
The official record names Polyurea Rayston. Its TDS reports watertightness at 5 bar / 50 m water column, gel time 4 s at 25°C, typical 1.5–2 mm film from 1.5–2.0 kg/m², 324% elongation and WRAS approval 2208579. The turquoise coating is a finish, not the waterproofing layer.
Surface preparation decides the result
The TDS calls for mechanical preparation, crack repair, pull-off of at least 1.4 N/mm², concrete moisture below 4% and support temperature 10–40°C. These are product data, not published site-test results for this project.
To discuss a similar project, contact Krypton Egypt.
Official project record: Arkan Plaza fountain waterproofing on kryptonchemicalsolutions.com.
Project gallery




Explore more Krypton Egypt projects.


No comment