Damietta Power Station roof waterproofing

Damietta Power Station roof waterproofing used hot-spray polyurea in 2021. Pure Contracting applied the work.

Contractor Pure Contracting
Completed 2021
Website Krypton Chemical Solutions — Damietta Power Station

Project overview

The official record states that roofs at Damietta Power Station were waterproofed with hot-spray polyurea in 2021 by Pure Contracting. A power-station roof is a working cover over equipment that cannot stop for a long recoating window.

Scope of waterproofing works

  • Place: Damietta Power Station.
  • Year: 2021.
  • Scope: roofs.
  • System: hot-spray pure polyurea.
  • Applicator: Pure Contracting.

Krypton systems for this type of work

The official project record names Polyurea Rayston, Krypton’s hot-spray pure polyurea. Its TDS reports 4 s gel time at 25°C, a typical 1.5–2 mm film from 1.5–2.0 kg/m², 324% elongation and tensile strength 16.2 MPa. The resin is aromatic, so sunlight may shift colour while mechanical strength remains. A topcoat is not confirmed on this job unless named by the source.

Surface preparation decides the result

The TDS calls for mechanical preparation and crack repair first, substrate pull-off at least 1.4 N/mm², moisture below 4% and support temperature 10–40°C. These are datasheet conditions, not published site-test results for this project.

Contractor: Pure Contracting. Completed: 2021. To discuss a similar project, contact Krypton Egypt.

Official project record: Damietta Power Station roof waterproofing on kryptonchemicalsolutions.com.

Project gallery

Illustrative image from the official project record: Damietta Power Station roof waterproofing

Explore more Krypton Egypt projects.

No comment

Leave a Reply

Your email address will not be published. Required fields are marked *