El Yosr Hurghada tank waterproofing
El Yosr Hurghada tank waterproofing used hot-spray pure polyurea to line the station’s water tanks in 2018. The official record names Polyurea Rayston and does not name an applicator.
Completed 2018
Website Krypton Chemical Solutions — El Yosr Station
Project overview
The official record states that water tanks at El Yosr station in Hurghada were lined with hot-spray pure polyurea in 2018. A tank lining stays under permanent water; repairs mean draining equipment that a station relies on.
Scope of waterproofing works
- Place: El Yosr station, Hurghada.
- Year: 2018.
- Scope: water tanks.
- System: hot-spray pure polyurea.
Krypton systems for this type of work
The official project record names the lining as Polyurea Rayston, Krypton’s hot-spray pure polyurea. Its TDS reports watertightness at 5 bar / 50 m water column (EN 12390-8), liquid water permeability 0.002 kg/m²·h0.5 (EN 1062-3:2008), gel time 4 s at 25°C, a typical 1.5–2 mm film from 1.5–2.0 kg/m², 324% elongation and WRAS material approval 2208579.
The full TDS lists 4 s gel time for a 20 g A+B mix at 25°C and 3 s at 60°C, tack-free time 30 s at 70°C, tensile strength 16.2 MPa, tear strength 69 N/mm and hardness 87A/35D. It also reports static crack bridging A5 at −10°C, dynamic class B4.2 at 23°C and −20°C, impact strength 24.5 N·m (class III), and CE marking to EN 1504-2.
Surface preparation decides the result
The Polyurea Rayston TDS calls for mechanical preparation and crack repair first. Concrete moisture should stay below 4%, support temperature should be 10–40°C, and substrate pull-off should reach at least 1.4 N/mm². These are datasheet conditions, not published site-test results for this job.
Completed: 2018. To discuss a similar project, contact Krypton Egypt.
Official project record: El Yosr station tank waterproofing on kryptonchemicalsolutions.com.
Project gallery

Explore more Krypton Egypt projects.


No comment