RAYSTON POLYUREA

RAYSTON POLYUREA H FLEX

RAYSTON POLYUREA X5

PROLINE CH 55

PROLINE AB95P +P

COLD POLYUREA

RAYSTON POLYUREA H-F ALUM

PROLINE AB85H

1

RAYSTON POLYUREA

  • Fast curing, 100% pure polyurea system with excellent chemical resistance and very good mechanical properties. It fulfills the health criteria for water intended for human consumption. CE mark according to EN-1504-2 norm for concrete protection. ETA Certificate according to ETAG005 (nº16/0148) & BBA certificate (nº18/5582) for roofing with 25 years expected durability.
  • WRAS certificate according to BS6920 1: 2000 Nº2208579.
DOWNLOADDOWNLOAD

Applications

  • Concrete waterproofing.
  • Seamless liners for secondary containment, gutters, tanks, etc.
  • Drinking water tanks as well as wastewater treatment plants.
  • Roofing and terraces.
  • Car park decks.
  • Stadium bleachers.
  • Protective topcoat is required if the coating is exposed to UV rays to ensure colour stability. This product is suitable for the “Liner” system in combi-nation with GEOMAX SPRAY NMDC.

Protective topcoat is required if the coating is exposed to UV rays to ensure colour stability.

This product is suitable for the “Liner” system in combi-nation with GEOMAX SPRAY NMDC.

2

RAYSTON POLYUREA H FLEX

  • Highly elastomeric, fast curing, hybrid polyurea system. Contains more than 50% of pure polyurea. CE Mark for bridge deck waterproofing and ETA Certificate according to EAD-030675-00- 0107 (nº21/0740).
  • RAYSTON POLYUREA H FLEX is the fast-curing version, recommended for vertical structures or those with a significant slope to prevent resin sagging.
DOWNLOADDOWNLOAD

Applications

  • Waterproofing of bridge and viaduct decks.
  • Roof waterproofing.
  • Car park roof waterproofing.

Waterproofing and protection of structures (concrete, me-tal…), especially those exposed to the exterior. Protection of polyurethane insulating foam.

3

RAYSTON POLYUREA X5

  • Expandable polyurea that forms an elastic and flexible membrane. Expands to 3-5 times its original volume. Whitish colour.
DOWNLOADDOWNLOAD

Applications

  • Can be used as a primer for irregular and dry surfaces like corrugated metal, fibrocement, bitumen felt or concrete.
  • Low cost waterproofing system for roofs without traffic (must be protected with an aliphatic top coat though). Asbestos en-capsulation certificate.
  • As cushioning layer against impact on floors.
  • Sound impact reduction on floors and roofs.

CE mark.

4

PROLINE CH 55

  • Pure polyurea membrane formulated to provide excellent chemical and moisture resistance for submersion applications.
  • The dense but flexible nature of the finished lining is ideal for impact and abrasion resistance. Once cured it forms a continuous and seamless barrier with high impact properties. Very low permeability to Radon, Methane and Carbon Dioxide gases. Very low permeability.
    High puncture and compression resistance.
  • CE mark according EN 1504-2 norm for the protection of concrete structures. Certified system C5H according to ISO 12944-6:2018
DOWNLOADDOWNLOAD

Applications

  • Lining of tanks containing chemical and / or high solids liquids.
  • Lining of secondary containment bunds subject to chemical leaks.
  • Pipe linings, culvert linings.
  • Blast mitigation.
  • Pipe coating for below ground applications including in soils with high moisture and chemical content.
  • Above ground pipe coating applications subject to sand abrasion.
  • Re-instatment of leaking concrete tanks or substrates subject to movement.
5

PROLINE AB95P

  • Pure Polyurea for industrial applications. ProLine AB95P is formulated using 100% pure polyurea technology to produce an extremely hard wearing seamless protective lining that exhibits excellent abrasion and
    impact resistance. Spray applied to any thickness in one application, even in challenging environmental circumstances its instant curing features result in a very rapid return to service for industry. Excellent elongation and high tensile strength. Maintains physical characteristics through a wide temperature range -40ºC-+120ºC. Can be easily and quickly repaired. Good chemical resistance. Can incorporate wear indicator zones for planned maintenance.
DOWNLOADDOWNLOAD

Applications

  • Mining equipment.
  • Separator tanks.
  • Pipe linings, culvert linings.
  • Slurry and processing tanks.
  • Bulk material storage and handling.
  • Bins, hoppers, chutes.
  • Train carriage linings.
  • Conveyor belt repairs.
  • Trunks linings
6

COLD POLYUREA

  • Membrane based on a two-component, self-leveling, pure aromatic polyurea resin that is solvent-based. Fast curing and highly elastic (ability to bridge over the fissures form the support). Roller applied. Specially designed for flat roof waterproofing.
  • It is always recommended to protect it with an aliphatic top-coat if it is applied exposed outdoors.
DOWNLOADDOWNLOAD

Applications

Certificates (roofing) ETE nº 17/0509 and BBA (including “blue roof”).

7

RAYSTON POLYUREA H FLEX ALUM

  • RAYSTON POLYUREA H FLEX ALUM is a 2-component polyurea
    resin, which cures very fast.
  • This product can only be applied by 2-component spraying
    equipment.
DOWNLOADDOWNLOAD

Applications

Polyurea H Flex Alum is version of Impermax Polyurea H Flex that contains special aluminum pigments that give it a better UV stability and colour fastness. No need to apply a topcoat over it.

8

PROLINE AB85H

  • Hybrid polyurea for Industrial applications. ProLine AB85H is formulated using hybrid polyurea technology and produces an extremely abrasion resistant (4mg loss CS17, 1000grams, 1000 rev) and impact resistant seamless protective lining.
  • Applied to any thickness in one application and curing in minutes it provides a very rapid solution to industrial maintenance projects that require excellent abrasion resistance, impact resistance, permanent corrosion protection of the substrate and a very rapid return to service. Can be easy and quickly repaired. Can incorporate wear indicator zones for planned maintenance.
DOWNLOADDOWNLOAD

Applications

  • Bins and hoppers.
  • Dump truck bodies.
  • Ball mill linings.
  • Slurry and processing tanks.
  • Bulk material storage and handling facilities – grain, fertilizer, sand, gravel, coal, iron ore, gypsum etc.
  • Bulk material rail carriages.
  • Trunks linings.

OEM parts subject to abrasion.