Rayston Tile Epoxy

Rayston Tile 40

Rayston Tile Grout

USES

  • Food production: meat, fish, vegetable and fruit processing, canning areas, dairies and bakeries.
  • Industrial kitchens and catering facilities.
  • Electrical substations and plant rooms.
  • Laboratories.
  • Swimming pools and leisure facilities.
  • Heavy duty workshops, garages and services facilities.
  • Bottling plants and breweries.
2

Rayston Tile 40

For Fixing of Ceramics, Marble, and Decorative Cladding

  • Rayston Tile 40 is a grey cementitious powder formulated as a high-performance fixing adhesive for a wide range of applications.

USES

  • Ceramic wall and floor tiles, terrazzo, quarry tiles and stone cladding in internal applications. Rayston Tile 40 may be employed with confidence in institutional or high traffic conditions. Rayston Tile 40 is suitable for use in kitchens, showers and wet process areas.
3

Rayston Tile Grout

Powder for Effortless, Water-Resistant Grouting

  • Rayston Tile Grout is a fine coloured powder which, when mixed with water, gives a smooth, easily applied creamy paste for clean grouting of ceramic tiles. It sets to a decorative water-resistant finish.

USES

  • Grouting Ceramic Tiles: The primary use of Rayston Tile Grout is to fill the gaps between ceramic tiles. This creates a smooth, water-resistant, and decorative finish.

Key technical data at a glance

  • Rayston Tile 40: polymer-modified cement adhesive complying with EN 12004 and ANSI A118.4. It is applied 3–6 mm thick (up to 12 mm on small uneven areas), has a 60-minute pot life at 23 °C and takes foot traffic after 24 hours. For exterior work, mix it with water and Rayston Latex Ultra at 1:1 by volume.
  • Rayston Tile Grout: water-resistant cementitious grout for joints up to 4 mm, suitable for swimming pools and formulated for Middle East conditions. 1 kg grouts about 4 m² of 15 × 15 cm tiles. Wait at least 24 hours after fixing before grouting. Supplied in 5 and 20 kg bags.
  • Rayston Tile Epoxy: 80 N/mm² compressive strength, 25 N/mm² flexural strength and a maximum service temperature of 60 °C. It resists dilute acids, salt water, oils and fats, opens to foot traffic after about 24 hours and fully cures in 72 hours at 20 °C. Supplied in 4 kg packs.

Download the data sheets above for full application procedures, or ask our team which system suits your tiles and service conditions.